Как это сделать в Linux

[solo]

А можно для ДЕРЕВЯННОГО ЧАЙНИКА пользователя инструкцию, а то честно говоря вроде понятно что "зашел в католог " это наверное проводником но как там сказать "make" честно товоря это меня ставит в тупик или надо все не так?

далее "sudo make install" и драйвер стоит где ему и положено--- это наверное надо писать в терминали

[Serg]

Я всё это делаю в терминале.

[Nick]

Не, не проводником.
Запускаешь терминал (Ctrl+Alt+T)
В нем cd и нужный каталог.

потом пишешь make
потом
sudo make install тут спросит пароль, набираешь свой пароль (буквы и даже * не будут отображаться, это нормально).
Если что-то идет не так пиши сюда вывод.

---
не успел

[solo]

В терминале что то происходито после "make" минуты 2-3 после того как все остановилось
написал sudo make install ввел пароль и вроде все нормально
в терминале осталась строка с каталогом где были драйвера.
Вроде все нормально установилось
далее захожу в Network Connections создаю вай Фай соединение а линух его не видет ( предварительно включаю общий интернет на телефоне) может я чегото не правельно делаю или драйвара не правельно стали

[Serg]

В терминале что то происходито после "make" минуты 2-3 после того как все остановилось

Ну хотя б показал с десяток последних строчек... Как будто ты за копипаст бабло платишь, а у нас тут бесплатная телепатия...

может я чегото не правельно делаю или драйвара не правельно стали

Может. После установки драйвера адаптер перетыкал?

[solo]

сделал повторно make и sudo make install
вот содержимое терминала но правда все както закончелось быстро

Код: Выделить всё

cnc@cnc-desktop:~$ cd /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809 
cnc@cnc-desktop:~/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809$ make
make -C tools
make[1]: Entering directory `/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/tools'
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/tools/bin2h
cp -f os/linux/Makefile.6 /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/Makefile
make -C /lib/modules/2.6.32-122-rtai/build SUBDIRS=/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-122-rtai'
  CC [M]  /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/../../common/rtmp_mcu.o
In file included from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/rt_config.h:74,
                 from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/../../common/rtmp_mcu.c:39:
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/rtmp_def.h:431:35: warning: "MAX_MBSSID_NUM" is not defined
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/rtmp_def.h:433:35: warning: "MAX_MBSSID_NUM" is not defined
In file included from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/chip/mac_usb.h:41,
                 from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/chip/rt3070.h:59,
                 from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/rtmp_chip.h:48,
                 from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/rt_config.h:75,
                 from /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/../../common/rtmp_mcu.c:39:
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/chip/rtmp_mac.h:2918:12: warning: backslash and newline separated by space
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/chip/rtmp_mac.h:2920:126: warning: backslash and newline separated by space
/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/include/chip/rtmp_mac.h:2937:56: warning: backslash and newline separated by space
  LD [M]  /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/rt5370sta.o
  Building modules, stage 2.
  MODPOST 1 modules
  LD [M]  /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/rt5370sta.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-122-rtai'
cp -f /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux/rt5370sta.ko /tftpboot
cp: cannot create regular file `/tftpboot': Permission denied
make: *** [LINUX] Error 1
cnc@cnc-desktop:~/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809$ sudo make install
[sudo] password for cnc: 
make -C /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/2.6.32-122-rtai/kernel/drivers/net/wireless/
install -m 644 -c rt5370sta.ko /lib/modules/2.6.32-122-rtai/kernel/drivers/net/wireless/
/sbin/depmod -a 2.6.32-122-rtai
make[1]: Leaving directory `/home/cnc/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809/os/linux'
cnc@cnc-desktop:~/DPO_RT5370_LinuxSTA_V2.4.0.0_20100809$ 

адапрер перетыкал , компьютер перегружал

[Nick]

а напиши теперь в консоле iwconfig

[Serg]

адапрер перетыкал , компьютер перегружал

dmesg что в конце пишет?

Код: Выделить всё

dmesg | tail -20

[solo]

dmesg | tail -20

если пишу dmesg | tail -20 пишет команд ноу фонд" tail -20"

Код: Выделить всё

cnc@cnc-desktop:~$ dmesg | tail
[ 1813.930328] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.935565] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.935576]  sdb: sdb1
[ 1813.941951] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.941963] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1935.872876] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1935.892579] ISOFS: changing to secondary root
[ 2152.790811] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2152.829420] ISOFS: changing to secondary root
[ 2765.112028] usb 1-8: reset high speed USB device using ehci_hcd and address 6
cnc@cnc-desktop:~$

[Serg]

если пишу dmesg | tail -20 пишет команд ноу фонд" tail -20"

Теперь я просто уверен, что у тебя копипаст платный и очень дорогой!

Что напишет dmesg после команды

Код: Выделить всё

sudo /sbin/modprobe rt5370sta

адаптер должен быть вставлен.

[solo]

а напиши теперь в консоле iwconfig

Код: Выделить всё

cnc@cnc-desktop:~$ iwconfig
lo        no wireless extensions.

ra0       Ralink STA  
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

cnc@cnc-desktop:~$ 

[solo]

sudo /sbin/modprobe rt5370sta

cnc@cnc-desktop:~$ sudo /sbin/modprobe rt5370sta
[sudo] password for cnc:
WARNING: All config files need .conf: /etc/modprobe.d/emc2, it will be ignored in a future release.
cnc@cnc-desktop:~$

[Serg]

Что напишет dmesg после команды

Код: Выделить всё

sudo /sbin/modprobe rt5370sta

[solo]

Что напишет dmesg после команды

Код: Выделить всё

sudo /sbin/modprobe rt5370sta

Код: Выделить всё

[    0.135254] NetLabel:  unlabeled traffic allowed by default
[    0.135318] Switching to clocksource tsc
[    0.135999] AppArmor: AppArmor Filesystem Enabled
[    0.135999] pnp: PnP ACPI init
[    0.135999] ACPI: bus type pnp registered
[    0.148141] pnp: PnP ACPI: found 16 devices
[    0.148147] ACPI: ACPI bus type pnp unregistered
[    0.148154] PnPBIOS: Disabled by ACPI PNP
[    0.148178] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.148185] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.148201] system 00:06: ioport range 0xa00-0xa0f has been reserved
[    0.148207] system 00:06: ioport range 0x290-0x29f has been reserved
[    0.148214] system 00:06: ioport range 0xa20-0xa2f has been reserved
[    0.148220] system 00:06: ioport range 0xa30-0xa3f has been reserved
[    0.148233] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.148240] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.148247] system 00:07: ioport range 0x480-0x4bf has been reserved
[    0.148254] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.148261] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.148274] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.148281] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.148296] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.148309] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.148316] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[    0.148323] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.148330] system 00:0f: iomem range 0x100000-0x7f6fffff could not be reserved
[    0.148337] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.183275] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[    0.183282] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.183291] pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
[    0.183299] pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
[    0.183308] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[    0.183314] pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
[    0.183322] pci 0000:00:1c.3:   MEM window: 0x80400000-0x805fffff
[    0.183330] pci 0000:00:1c.3:   PREFETCH window: 0x00000080600000-0x000000807fffff
[    0.183339] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.183344] pci 0000:00:1e.0:   IO window: disabled
[    0.183351] pci 0000:00:1e.0:   MEM window: disabled
[    0.183357] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.183374] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.183637] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.183643] PCI: setting IRQ 11 as level-triggered
[    0.183651] pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.183660] pci 0000:00:1c.0: setting latency timer to 64
[    0.183672] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[    0.183909] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.183915] PCI: setting IRQ 10 as level-triggered
[    0.183923] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.183931] pci 0000:00:1c.3: setting latency timer to 64
[    0.183942] pci 0000:00:1e.0: setting latency timer to 64
[    0.183950] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.183956] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.183962] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
[    0.183968] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
[    0.183974] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[    0.183980] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.183986] pci_bus 0000:02: resource 1 mem: [0x80400000-0x805fffff]
[    0.183992] pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff]
[    0.183998] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.184003] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.184067] NET: Registered protocol family 2
[    0.184243] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.184860] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.185716] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.186114] TCP: Hash tables configured (established 131072 bind 65536)
[    0.186120] TCP reno registered
[    0.186299] NET: Registered protocol family 1
[    0.186339] pci 0000:00:02.0: Boot video device
[    0.186807] Scanning for low memory corruption every 60 seconds
[    0.186975] audit: initializing netlink socket (disabled)
[    0.187000] type=2000 audit(1366021477.184:1): initialized
[    0.199951] Trying to unpack rootfs image as initramfs...
[    0.217171] highmem bounce pool size: 64 pages
[    0.217183] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.220325] VFS: Disk quotas dquot_6.5.2
[    0.220441] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.221704] fuse init (API version 7.13)
[    0.221894] msgmni has been set to 1681
[    0.229137] alg: No test for stdrng (krng)
[    0.229291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.229298] io scheduler noop registered
[    0.229302] io scheduler anticipatory registered
[    0.229307] io scheduler deadline registered
[    0.229396] io scheduler cfq registered (default)
[    0.229595]   alloc irq_desc for 16 on node -1
[    0.229601]   alloc kstat_irqs on node -1
[    0.229618] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X
[    0.229629] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.229788]   alloc irq_desc for 17 on node -1
[    0.229793]   alloc kstat_irqs on node -1
[    0.229805] pcieport 0000:00:1c.3: irq 17 for MSI/MSI-X
[    0.229815] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.229957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.230108] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.230259] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.230267] ACPI: Power Button [PWRB]
[    0.230364] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.230371] ACPI: Power Button [PWRF]
[    0.233196] isapnp: Scanning for PnP cards...
[    0.239050] hpet_acpi_add: no address or irqs in _CRS
[    0.239160] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.239281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.239415] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.239911] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.240100] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.242301] brd: module loaded
[    0.243333] loop: module loaded
[    0.243522] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.243704] ata_piix 0000:00:1f.2: version 2.13
[    0.243726] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[    0.243738] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.243747] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.243804] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.292078] scsi0 : ata_piix
[    0.292304] scsi1 : ata_piix
[    0.295804] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[    0.295811] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[    0.301505] Fixed MDIO Bus: probed
[    0.301586] PPP generic driver version 2.4.2
[    0.301686] tun: Universal TUN/TAP device driver, 1.6
[    0.301691] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.301872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.302185] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[    0.302192] PCI: setting IRQ 5 as level-triggered
[    0.302201] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
[    0.302227] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.302234] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.302318] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.302349] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.302363] ehci_hcd 0000:00:1d.7: debug port 1
[    0.306248] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.308691] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xfbfffc00
[    0.328623] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.328858] usb usb1: configuration #1 chosen from 1 choice
[    0.328920] hub 1-0:1.0: USB hub found
[    0.328938] hub 1-0:1.0: 8 ports detected
[    0.329058] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.329090] uhci_hcd: USB Universal Host Controller Interface driver
[    0.329155] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
[    0.329169] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.329175] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.329254] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.329289] uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000e480
[    0.329480] usb usb2: configuration #1 chosen from 1 choice
[    0.329537] hub 2-0:1.0: USB hub found
[    0.329552] hub 2-0:1.0: 2 ports detected
[    0.329636] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.329647] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.329653] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.329726] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.329760] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000e800
[    0.329935] usb usb3: configuration #1 chosen from 1 choice
[    0.329991] hub 3-0:1.0: USB hub found
[    0.330006] hub 3-0:1.0: 2 ports detected
[    0.330370] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.330379] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    0.330390] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.330396] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.330481] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.330513] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e880
[    0.330705] usb usb4: configuration #1 chosen from 1 choice
[    0.330763] hub 4-0:1.0: USB hub found
[    0.330779] hub 4-0:1.0: 2 ports detected
[    0.330866] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.330877] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.330883] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.330957] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.330989] uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000ec00
[    0.331167] usb usb5: configuration #1 chosen from 1 choice
[    0.331223] hub 5-0:1.0: USB hub found
[    0.331238] hub 5-0:1.0: 2 ports detected
[    0.331417] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.331422] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.331591] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.337258] mice: PS/2 mouse device common for all mice
[    0.337508] rtc_cmos 00:03: RTC can wake from S4
[    0.337587] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.337615] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    0.337856] device-mapper: uevent: version 1.0.3
[    0.338073] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.338193] device-mapper: multipath: version 1.1.0 loaded
[    0.338199] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.338443] EISA: Probing bus 0 at eisa.0
[    0.338453] Cannot allocate resource for EISA slot 1
[    0.338459] Cannot allocate resource for EISA slot 2
[    0.338483] EISA: Detected 0 cards.
[    0.338488] cpuidle: using governor ladder
[    0.338493] cpuidle: using governor menu
[    0.339324] TCP cubic registered
[    0.339656] NET: Registered protocol family 10
[    0.340511] lo: Disabled Privacy Extensions
[    0.341164] NET: Registered protocol family 17
[    0.341231] Using IPI No-Shortcut mode
[    0.341430] registered taskstats version 1
[    0.341736] rtc_cmos 00:03: setting system clock to 2013-04-15 10:24:37 UTC (1366021477)
[    0.341743] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.341747] EDD information not available.
[    0.355301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.497189] ata2.01: NODEV after polling detection
[    0.497365] ata1.00: ATA-8: ST3160316AS, JC4B, max UDMA/133
[    0.497372] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.505131] ata2.00: ATAPI: ATAPI   iHAS124   B, AL0N, max UDMA/100
[    0.513958] ata1.00: configured for UDMA/133
[    0.520829] ata2.00: configured for UDMA/100
[    0.924285] isapnp: No Plug & Play device found
[    0.924324] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    0.924568] scsi 0:0:0:0: Direct-Access     ATA      ST3160316AS      JC4B PQ: 0 ANSI: 5
[    0.924860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.925176] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.925308] sd 0:0:0:0: [sda] Write Protect is off
[    0.925315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.925383] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.925722]  sda:
[    0.929682] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0N PQ: 0 ANSI: 5
[    0.936989] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.936998] Uniform CD-ROM driver Revision: 3.20
[    0.937202] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.937324] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.942901]  sda1 sda2 < sda5 >
[    0.975449] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.103988] usb 4-1: configuration #1 chosen from 1 choice
[    1.132902] Freeing initrd memory: 12841k freed
[    1.141698] Freeing unused kernel memory: 620k freed
[    1.142217] Write protecting the kernel text: 4540k
[    1.142260] Write protecting the kernel read-only data: 1668k
[    1.181668] udev: starting version 151
[    1.617481] Linux agpgart interface v0.103
[    1.707625] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    1.707863] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    1.719119] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.729307] [drm] Initialized drm 1.1.0 20060810
[    1.740766] usbcore: registered new interface driver hiddev
[    1.758641] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
[    1.758849] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.2-1/input0
[    1.758898] usbcore: registered new interface driver usbhid
[    1.758905] usbhid: v2.6:USB HID core driver
[    1.787239] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    1.787250] i915 0000:00:02.0: setting latency timer to 64
[    1.797680]   alloc irq_desc for 18 on node -1
[    1.797688]   alloc kstat_irqs on node -1
[    1.797703] i915 0000:00:02.0: irq 18 for MSI/MSI-X
[    1.797714] [drm] set up 7M of stolen space
[    1.803282] [drm] initialized overlay support
[    1.970760] fb0: inteldrmfb frame buffer device
[    1.970766] registered panic notifier
[    1.971069] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.976125] vga16fb: initializing
[    1.976133] vga16fb: mapped to 0xc00a0000
[    1.976142] vga16fb: not registering due to another framebuffer present
[    1.994423] [drm] Big FIFO is enabled
[    2.064018] [drm] Big FIFO is enabled
[    2.064032] [drm] Big FIFO is enabled
[    2.064103] [drm] Big FIFO is disabled
[    2.136026] [drm] Big FIFO is disabled
[    2.136035] [drm] Big FIFO is disabled
[    2.144235] Console: switching to colour frame buffer device 128x48
[    2.769682] xor: automatically using best checksumming function: pIII_sse
[    2.788010]    pIII_sse  :  5572.000 MB/sec
[    2.788015] xor: using function: pIII_sse (5572.000 MB/sec)
[    2.794621] device-mapper: dm-raid45: initialized v0.2594b
[    3.067887] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    9.794547] Adding 6010872k swap on /dev/sda5.  Priority:-1 extents:1 across:6010872k 
[    9.803187] udev: starting version 151
[    9.954818] lp: driver loaded but no devices found
[   10.601681] parport_pc 00:0d: reported by Plug and Play ACPI
[   10.601712] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   10.755493] ppdev: user-space parallel port driver
[   10.792382] lp0: using parport0 (interrupt-driven).
[   11.018069] type=1505 audit(1366021488.174:2):  operation="profile_load" pid=584 name="/sbin/dhclient3"
[   11.018572] type=1505 audit(1366021488.174:3):  operation="profile_load" pid=584 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.018865] type=1505 audit(1366021488.174:4):  operation="profile_load" pid=584 name="/usr/lib/connman/scripts/dhclient-script"
[   11.394267] type=1505 audit(1366021488.550:5):  operation="profile_load" pid=686 name="/usr/share/gdm/guest-session/Xsession"
[   11.424679] type=1505 audit(1366021488.582:6):  operation="profile_replace" pid=688 name="/sbin/dhclient3"
[   11.425195] type=1505 audit(1366021488.582:7):  operation="profile_replace" pid=688 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.425495] type=1505 audit(1366021488.582:8):  operation="profile_replace" pid=688 name="/usr/lib/connman/scripts/dhclient-script"
[   11.532628] type=1505 audit(1366021488.690:9):  operation="profile_load" pid=690 name="/usr/bin/evince"
[   11.556311] type=1505 audit(1366021488.714:10):  operation="profile_load" pid=690 name="/usr/bin/evince-previewer"
[   11.601906] type=1505 audit(1366021488.758:11):  operation="profile_load" pid=690 name="/usr/bin/evince-thumbnailer"
[   12.460570] [drm] Big FIFO is disabled
[   12.532097] [drm] Big FIFO is disabled
[   12.532113] [drm] Big FIFO is disabled
[   34.520026] usb 1-7: new high speed USB device using ehci_hcd and address 3
[   34.670481] usb 1-7: configuration #1 chosen from 1 choice
[   34.765710] rtusb init --->
[   34.765759] ===>rt2870_probe()!
[   34.765765] --> RTMPAllocAdapterBlock
[   34.765996] 
[   34.765998] 
[   34.765999] === pAd = f905f000, size = 512912 ===
[   34.766002] 
[   34.766181] <-- RTMPAllocAdapterBlock, Status=0
[   34.766186] NumEndpoints=7
[   34.766190] BULK IN MaxPacketSize = 512
[   34.766194] EP address = 0x81
[   34.766197] BULK OUT MaxPacketSize = 512
[   34.766201] EP address = 0x 1  
[   34.766204] BULK OUT MaxPacketSize = 512
[   34.766208] EP address = 0x 2  
[   34.766211] BULK OUT MaxPacketSize = 512
[   34.766215] EP address = 0x 3  
[   34.766218] BULK OUT MaxPacketSize = 512
[   34.766222] EP address = 0x 4  
[   34.766225] BULK OUT MaxPacketSize = 512
[   34.766229] EP address = 0x 5  
[   34.766232] BULK OUT MaxPacketSize = 512
[   34.766236] EP address = 0x 6  
[   34.766241] STA Driver version-2.4.0.0
[   34.766565] NVM is EFUSE
[   34.766573] Allocate a net device with private data size=0!
[   34.766619] Allocate net device ops success!
[   34.766626] The name of the new ra interface is ra0...
[   34.766630] RtmpOSNetDevAttach()--->
[   34.779194] <---RtmpOSNetDevAttach(), ret=0
[   34.779202] <===rt2870_probe()!
[   34.781153] usbcore: registered new interface driver rt2870
[  253.692037] usb 1-8: new high speed USB device using ehci_hcd and address 4
[  253.827727] usb 1-8: configuration #1 chosen from 1 choice
[  253.894880] Initializing USB Mass Storage driver...
[  253.895100] scsi2 : SCSI emulation for USB Mass Storage devices
[  253.895421] usbcore: registered new interface driver usb-storage
[  253.895428] USB Mass Storage support registered.
[  253.906170] usb-storage: device found at 4
[  253.906177] usb-storage: waiting for device to settle before scanning
[  258.904167] usb-storage: device scan complete
[  258.904775] scsi 2:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[  258.909196] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  259.140334] sd 2:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[  259.140818] sd 2:0:0:0: [sdb] Write Protect is off
[  259.140825] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  259.140831] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  259.145319] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  259.145331]  sdb: sdb1
[  259.151454] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  259.151466] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  584.433533] usb 1-7: USB disconnect, address 3
[  584.433895] rtusb_disconnect: unregister usbnet usb-0000:00:1d.7-7
[  584.433902] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[  584.692100]  RTUSB disconnect successfully
[  591.412027] usb 1-7: new high speed USB device using ehci_hcd and address 5
[  591.562437] usb 1-7: configuration #1 chosen from 1 choice
[  591.563900] ===>rt2870_probe()!
[  591.563906] --> RTMPAllocAdapterBlock
[  591.564175] 
[  591.564177] 
[  591.564179] === pAd = f8ee2000, size = 512912 ===
[  591.564181] 
[  591.564362] <-- RTMPAllocAdapterBlock, Status=0
[  591.564368] NumEndpoints=7
[  591.564371] BULK IN MaxPacketSize = 512
[  591.564375] EP address = 0x81
[  591.564378] BULK OUT MaxPacketSize = 512
[  591.564382] EP address = 0x 1  
[  591.564386] BULK OUT MaxPacketSize = 512
[  591.564389] EP address = 0x 2  
[  591.564393] BULK OUT MaxPacketSize = 512
[  591.564396] EP address = 0x 3  
[  591.564400] BULK OUT MaxPacketSize = 512
[  591.564403] EP address = 0x 4  
[  591.564407] BULK OUT MaxPacketSize = 512
[  591.564410] EP address = 0x 5  
[  591.564414] BULK OUT MaxPacketSize = 512
[  591.564417] EP address = 0x 6  
[  591.564422] STA Driver version-2.4.0.0
[  591.566160] NVM is EFUSE
[  591.566169] Allocate a net device with private data size=0!
[  591.566211] Allocate net device ops success!
[  591.566219] The name of the new ra interface is ra0...
[  591.566223] RtmpOSNetDevAttach()--->
[  591.574166] <---RtmpOSNetDevAttach(), ret=0
[  591.574174] <===rt2870_probe()!
[  641.278239] usb 1-8: USB disconnect, address 4
[ 1808.176026] usb 1-8: new high speed USB device using ehci_hcd and address 6
[ 1808.311716] usb 1-8: configuration #1 chosen from 1 choice
[ 1808.326705] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1808.334881] usb-storage: device found at 6
[ 1808.334887] usb-storage: waiting for device to settle before scanning
[ 1813.332250] usb-storage: device scan complete
[ 1813.332856] scsi 3:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 1813.337816] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1813.929830] sd 3:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 1813.930315] sd 3:0:0:0: [sdb] Write Protect is off
[ 1813.930323] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1813.930328] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.935565] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.935576]  sdb: sdb1
[ 1813.941951] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.941963] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1935.872876] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1935.892579] ISOFS: changing to secondary root
[ 2152.790811] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2152.829420] ISOFS: changing to secondary root
[ 2765.112028] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[ 3626.711858] usb 1-8: USB disconnect, address 6
[ 4458.980025] usb 1-8: new high speed USB device using ehci_hcd and address 7
[ 4459.115794] usb 1-8: configuration #1 chosen from 1 choice
[ 4459.130714] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4459.138933] usb-storage: device found at 7
[ 4459.138939] usb-storage: waiting for device to settle before scanning
[ 4464.136206] usb-storage: device scan complete
[ 4464.136814] scsi 4:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 4464.141263] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4464.373372] sd 4:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 4464.373857] sd 4:0:0:0: [sdb] Write Protect is off
[ 4464.373864] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4464.373869] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4464.378607] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4464.378619]  sdb: sdb1
[ 4464.384877] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4464.384888] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4485.679967] INFO::Network is down!
[ 4485.679975] INFO::Network is down!
[ 4485.679985] INFO::Network is down!
[ 4485.679991] INFO::Network is down!
[ 4485.680799] INFO::Network is down!
[ 4485.680813] INFO::Network is down!
[ 4485.680820] INFO::Network is down!
[ 4485.680826] INFO::Network is down!
[ 4485.680918] rt28xx_get_wireless_stats --->
[ 4485.681036] INFO::Network is down!
[ 4485.681043] INFO::Network is down!
[ 4485.681049] INFO::Network is down!
[ 4485.681054] INFO::Network is down!
[ 4553.299075] usb 1-8: USB disconnect, address 7
[ 4901.104025] usb 1-8: new high speed USB device using ehci_hcd and address 8
[ 4901.239718] usb 1-8: configuration #1 chosen from 1 choice
[ 4901.254714] scsi5 : SCSI emulation for USB Mass Storage devices
[ 4901.262942] usb-storage: device found at 8
[ 4901.262948] usb-storage: waiting for device to settle before scanning
[ 4906.260258] usb-storage: device scan complete
[ 4906.260865] scsi 5:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 4906.265868] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 4907.624433] sd 5:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 4907.624936] sd 5:0:0:0: [sdb] Write Protect is off
[ 4907.624944] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4907.624950] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4907.629167] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4907.629178]  sdb: sdb1
[ 4907.635053] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4907.635064] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4993.502431] usb 1-8: USB disconnect, address 8
[ 6545.680033] usb 1-8: new high speed USB device using ehci_hcd and address 9
[ 6545.815735] usb 1-8: configuration #1 chosen from 1 choice
[ 6545.830618] scsi6 : SCSI emulation for USB Mass Storage devices
[ 6545.838855] usb-storage: device found at 9
[ 6545.838861] usb-storage: waiting for device to settle before scanning
[ 6550.836265] usb-storage: device scan complete
[ 6550.836876] scsi 6:0:0:0: Direct-Access     Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 6550.842466] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6552.200561] sd 6:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 6552.201045] sd 6:0:0:0: [sdb] Write Protect is off
[ 6552.201052] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6552.201057] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6552.205545] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6552.205557]  sdb: sdb1
[ 6552.211313] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6552.211325] sd 6:0:0:0: [sdb] Attached SCSI removable disk
cnc@cnc-desktop:~$ 

[solo]

Теперь я просто уверен, что у тебя копипаст платный и очень дорогой!

Может посоветуете какой другой адаптер USB => WI-FI можно без проблем поставить в Линух

[Serg]

Так этот и ставится без проблем.
У вас появился сетевой интерфейс ra0, теперь его надо настроить и запустить - это всё описано в приводимых выше ссылках, только вместо wlan0 указывайте ra0, ну и адреса из своей локальной сети используйте.

[solo]

Так этот и ставится без проблем.
У вас появился сетевой интерфейс ra0, теперь его надо настроить и запустить - это всё описано в приводимых выше ссылках, только вместо wlan0 указывайте ra0, ну и адреса из своей локальной сети используйте.

Спасиба за оптимистический прогноз
Если не затруднит для ЧАЙНИКА обьянить, что и как и где настраивать. Ну откровенно говоря я практически совсем не бум-бум, или хотя бы в какой ссылке все это описано ,а то я

[Serg]

Вот есть соседняя тема Настройка Wi-Fi сервера в Linux #1, в принципе достаточно выполнить те команды, что там написаны до выделенного текста, только заменить имя интерфейса и адреса на свои.
А вообще внутри архива, что вы тут выкладывали есть подробное описание кк ставить драйвер и как настраивать интерфейс.

P.S. Именно из-за этих двух тем пришлось подпись сменить!

[solo]

Спасибо я это уже читал и много другого
пробовал много чего плохо понимая что делаю но в данный момент не могу понять что не так
пишу в терминале
ifconfig -a
ifconfig ra0 up
iwlist ra0 scan
на сколько я понимаю после этого я должен увидеть все доступны вай-Фай соединения, а получаю следующий вывод в терминал

Код: Выделить всё

cnc@cnc-desktop:~$ ifconfig -a
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:360 errors:0 dropped:0 overruns:0 frame:0
          TX packets:360 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:27776 (27.7 KB)  TX bytes:27776 (27.7 KB)

ra0       Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7344 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:587520 (587.5 KB)

cnc@cnc-desktop:~$ iwlist ra0 scan
ra0       No scan results

cnc@cnc-desktop:~$ iwlist ra0 scan
ra0       No scan results

cnc@cnc-desktop:~$ 

тоесть получается что у меня не доступных соединений (телефон включен и общий интернет тоже) телефон с виндовс7 соединяется автоматом
в свои действия ориентировался на вот это
http://rus-linux.net/nlib.php?name=/MyL ... ktope.html
http://itshaman.ru/articles/54/nastroik ... ti-v-linux
http://habrahabr.ru/post/88281/

[Serg]

Возможно не находит потому, что на интерфейсе уже адрес прописан.
Дальше я могу пока только теоретизировать т.к. нет какого-нибудь адаптера, чтоб попробовать.
Разве что в выходные вернут ноут с wi-fi...