mpf file
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
mpf file
Hello everybody,
is there a possibility to convert ngc files to mpf ????
all that google can help me is with national geographic documentaries, not really what I am looking for
thanks a lot in advance
is there a possibility to convert ngc files to mpf ????
all that google can help me is with national geographic documentaries, not really what I am looking for
thanks a lot in advance
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
What is mpf? Where is it used?
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
spasiba bolschoi mr Nick
it s used for cnc machine Optimum, Siemens Sinumerik... 802D SL Pro
thanks a lot
it s used for cnc machine Optimum, Siemens Sinumerik... 802D SL Pro
thanks a lot
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
What the difference between it and Gcode?
Do you have a sample file?
Do you have a sample file?
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
am not really into all that, am fully experimenting so sounds all like latin to me ..will ask and answer you tomorrow.. other machine here is a Fagor 8030 running on .pim file
thanks a lot already
thanks a lot already
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
Probably they can take ordinal Gcode, then just rename the file...
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
ok will give it a try thanks
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
The code from the file, that you've send me in PM looks like ordinal gcode. Try just to rename the file and load it in your machine.
Код: Выделить всё
%00080
N20G00G05G90X00Y00Z8F400
N30T00.00
N40F160S100.100M3
N50G00
N60G00
N70G04K4(10.09.2010)
N80G00X-104Y-8
N90G00Z4
N100G01Z-2.5
N110G01G41X-80.351
N120G01Y0
N130G02X-74.177Y9.239I10J0
N140G01X-59.275Y15.411
N150G02X-24.578Y17.877I21.048J-50.813
N160G03X6.552Y44.022I6.205J24.218
N170G02X9.010Y48.026I3.988J0.308
N180G01X58.178Y68.392
N190G02X63.473Y66.051I1.531J-3.696
N200G02X63.473Y-66.051I-183.473J-66.051
N210G02X58.178Y-68.392I-3.764J1.355
N220G01X9.010Y-48.026
N230G02X6.552Y-44.022I1.531J3.696
N240G03X-24.578Y-17.877I-24.926J1.927
N250G02X-59.275Y-15.411I-13.650J53.279
N260G01X-74.177Y-9.239
N270G02X-80.351Y0.000I3.827J9.239
N280G01Y8
N290G01G40X-104
N300G01X-8Z-4.5
N310G01G41X-80.351
N320G01Y0
N330G02X-74.177Y9.239I10J0
N340G01X-59.275Y15.411
N350G02X-24.578Y17.877I21.048J-50.813
N360G03X6.552Y44.022I6.205J24.218
N370G02X9.010Y48.026I3.988J0.308
N380G01X58.178Y68.392
N390G02X63.473Y66.051I1.531J-3.696
N400G02X63.473Y-66.051I-183.473J-66.051
N410G02X58.178Y-68.392I-3.764J1.355
N420G01X9.010Y-48.026
N430G02X6.552Y-44.022I1.531J3.696
N440G03X-24.578Y-17.877I-24.926J1.927
N450G02X-59.275Y-15.411I-13.650J53.279
N460G01X-74.177Y-9.239
N470G02X-80.351Y0.000I3.827J9.239
N480G01Y8
N490G01G40X-104
N500G00Z20
N510G00
N520G00
N530G00
N540G00
N550G00
N560G00
N570G00
N580G00G90X00Y64Z40
N590M5M9
N600M30
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
I got it wrong and sended you one that worked already, sorry, here s a simple compass i made in inkscape and put it into ngc file, can you
give me your well respected opinion??
give me your well respected opinion??
- Вложения
-
- compass.zip
- (3.46 КБ) 989 скачиваний
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
What was wrong? Any errors? Or wrong movements?schoggi писал(а):I got it wrong
Try to add G90 code to the top of the code. It defines that all coordinates are in absolute values.
I.E.:
Код: Выделить всё
%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21 (All units in mm)
G90
...................
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
sorry .. wanted to say : I was wrong.... because send you a file first that worked ok, nothing was wrong with file..
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
Hello there
I finally managed to engrave my first simple paths with inkscape on the cnc, with a Little help of a friend..
the only Problem according to him, was that the machine, running on Siemens Sinumerik 802D SL.. had Problems with reading everything
between brackets ( ) in the cgode file...
So I had to delete all that manualy.. Is there like a Kind of program who can do that for me???
that would save a lot of time for me
thanks a lot in advance
I finally managed to engrave my first simple paths with inkscape on the cnc, with a Little help of a friend..
the only Problem according to him, was that the machine, running on Siemens Sinumerik 802D SL.. had Problems with reading everything
between brackets ( ) in the cgode file...
So I had to delete all that manualy.. Is there like a Kind of program who can do that for me???
that would save a lot of time for me
thanks a lot in advance
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
you can add to additional postprocessor
regex(r"\(.*\)","");
this will remove any of () and all the content between them.
regex(r"\(.*\)","");
this will remove any of () and all the content between them.
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
thanks a lot.. excellent
will give it a try after the Weekend and Keep you informed
Of great Help you are, Young master Nick
will give it a try after the Weekend and Keep you informed
Of great Help you are, Young master Nick
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
Had another try at it, with the additional stuff unfortunately in the note pad the brackets and their Content are still there ...
the post-ptocessor have to be set at None???
the post-ptocessor have to be set at None???
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: mpf file
Two things.
It seems that postprocessor does not affect Header and Footer. You can change them as it said in the standard header or footer:
(Using default footer. To add your own footer create file "footer" in the output dir.)
Second - recheck that you are opening correct file, there's active option that adds numeric suffix...
I've tried the same postprocessor and it removed all () exept header and footer.
regex(r"\(.*\)","");
It seems that postprocessor does not affect Header and Footer. You can change them as it said in the standard header or footer:
(Using default footer. To add your own footer create file "footer" in the output dir.)
Second - recheck that you are opening correct file, there's active option that adds numeric suffix...
I've tried the same postprocessor and it removed all () exept header and footer.
regex(r"\(.*\)","");
-
- Новичок
- Сообщения: 19
- Зарегистрирован: 17 окт 2012, 15:58
- Репутация: 0
- Контактная информация:
Re: mpf file
all turned out just fine now !!!!!!!!! You saved me a lot of work
thanks again for your time and effort
thanks again for your time and effort