anyway, if you will not find any errors in Mach config you always can use postprocessor remap.
remap("G02"->"G03","G03"->"G02");
See gcodetools post-processors for more info.
Gcode for paths
-
- Новичок
- Сообщения: 5
- Зарегистрирован: 04 янв 2012, 23:34
- Репутация: 0
- Контактная информация:
Re: Gcode for paths
Many thanks for your help
You were right about my Mach3 settings. In Mach3 general configurations I had 'IJ mode' set to 'Absolute' you have to set it to 'Inc'
And now works beautifully.
Great
You were right about my Mach3 settings. In Mach3 general configurations I had 'IJ mode' set to 'Absolute' you have to set it to 'Inc'
And now works beautifully.
Great
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: Gcode for paths
Yeah.... I think we should add G91.1 and G90 to the standard header. To ensure that this problem wont come up in the future.