G03 & G02
Добавлено: 03 авг 2012, 17:16
Hi Nick,
Unfortunally I have 2 controllers, one with support for G02&G03 and the other no.
My problem is with the RZNC-0501 from http://www.richnc.com
I wish to know if there is a way to disable the use this code and replace by many G01, like Eagle gcode plugin do.
..
G01 X26.7860 Y25.7328
G01 X26.7169 Y25.9455
G01 X26.6153 Y26.1448
G01 X26.4839 Y26.3257
G01 X26.3257 Y26.4839
G01 X26.1448 Y26.6153
G01 X25.9455 Y26.7169
G01 X25.7328 Y26.7860
G01 X25.5118 Y26.8210
G01 X25.2882 Y26.8210
G01 X25.0672 Y26.7860
G01 X24.8545 Y26.7169
..
Thanks a lot !
Ps: Plasma controller work well with G02&G03.
Unfortunally I have 2 controllers, one with support for G02&G03 and the other no.
My problem is with the RZNC-0501 from http://www.richnc.com
I wish to know if there is a way to disable the use this code and replace by many G01, like Eagle gcode plugin do.
..
G01 X26.7860 Y25.7328
G01 X26.7169 Y25.9455
G01 X26.6153 Y26.1448
G01 X26.4839 Y26.3257
G01 X26.3257 Y26.4839
G01 X26.1448 Y26.6153
G01 X25.9455 Y26.7169
G01 X25.7328 Y26.7860
G01 X25.5118 Y26.8210
G01 X25.2882 Y26.8210
G01 X25.0672 Y26.7860
G01 X24.8545 Y26.7169
..
Thanks a lot !
Ps: Plasma controller work well with G02&G03.