Toolpath not saving to a file?

cnc-club.ru for English speaking users
Аватара пользователя
fizgig
Новичок
Сообщения: 13
Зарегистрирован: 07 май 2012, 22:14
Репутация: 0
Контактная информация:

Toolpath not saving to a file?

Сообщение fizgig »

Still experimenting with this code on Windows XP (gcodetools v1.7). Before, I could save a toolpath to a file just fine. I must have screwed up a setting since now, no matter what I do, the toolpath is shown (and looks cool) but isn't saved to a file.

In my "preferences" location, I have "File" set to "output.ngc" and "Directory" set to "c:\".

Any idea why the file isn't saved anymore?
Аватара пользователя
fizgig
Новичок
Сообщения: 13
Зарегистрирован: 07 май 2012, 22:14
Репутация: 0
Контактная информация:

Re: Toolpath not saving to a file?

Сообщение fizgig »

Just realized that I can save if I do a "Path to Gcode" but I can't when I do an "Area" operation. So, what could stop an Area operation from saving?
Steel.ne
Почётный участник
Почётный участник
Сообщения: 112
Зарегистрирован: 21 апр 2012, 22:52
Репутация: 5
Контактная информация:

Re: Toolpath not saving to a file?

Сообщение Steel.ne »

IMHO Area operation only draw vectors, you need select tool, orientation points and proceed "path to gcode" with, or without contour
Аватара пользователя
fizgig
Новичок
Сообщения: 13
Зарегистрирован: 07 май 2012, 22:14
Репутация: 0
Контактная информация:

Re: Toolpath not saving to a file?

Сообщение fizgig »

Aha! Gotcha. I was confused since the Area menu also has a Preferences section with a file-output name and location section...
Steel.ne
Почётный участник
Почётный участник
Сообщения: 112
Зарегистрирован: 21 апр 2012, 22:52
Репутация: 5
Контактная информация:

Re: Toolpath not saving to a file?

Сообщение Steel.ne »

fizgig,
Area menu have "Path to gcode" tab also, so Preferences relates to this tab only
Аватара пользователя
Nick
Мастер
Сообщения: 22776
Зарегистрирован: 23 ноя 2009, 16:45
Репутация: 1735
Заслуга: Developer
Откуда: Gatchina, Saint-Petersburg distr., Russia
Контактная информация:

Re: Toolpath not saving to a file?

Сообщение Nick »

fizgig писал(а):Just realized that I can save if I do a "Path to Gcode" but I can't when I do an "Area" operation. So, what could stop an Area operation from saving?
Yep. Area function does not actually export Gcode it just generate paths that could be exported to Gcode by using Path to Gcode.
Ответить

Вернуться в «English forum»