dxfpoint
-
- Кандидат
- Сообщения: 98
- Зарегистрирован: 02 апр 2010, 19:10
- Репутация: 0
- Заслуга: Tester
- Контактная информация:
Re: dxfpoint
I all !
I try to use dxfpoint dev version. All is ok.
Setting circle.
Putting them to path and execute set as dxfpoint and save shape.
After this run Path to gcode and the drilling gcode is process nice.
My exemple svg file: But I want to have the drilling done in the center of the path...
So if the path show a circle i want dxfpoint set in the center ! Or if it is a square or rectangle...set the dxfpoint to the center of the shape.
Have a you an idea ? or perhaps this will be a new good feature to add to dxfpoint ?
Happy new year ! and Have a nice day.
I try to use dxfpoint dev version. All is ok.
Setting circle.
Putting them to path and execute set as dxfpoint and save shape.
After this run Path to gcode and the drilling gcode is process nice.
My exemple svg file: But I want to have the drilling done in the center of the path...
So if the path show a circle i want dxfpoint set in the center ! Or if it is a square or rectangle...set the dxfpoint to the center of the shape.
Have a you an idea ? or perhaps this will be a new good feature to add to dxfpoint ?
Happy new year ! and Have a nice day.
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: dxfpoint
Hi! Happy new year!
We are going to improve dfx_points a little bit to be able to drill large holes with small mill bits. Probably they will look almost the same with orientation points. So it'll be an arrow with the text field. Just give us some time
Or may be you have some suggestions?
We are going to improve dfx_points a little bit to be able to drill large holes with small mill bits. Probably they will look almost the same with orientation points. So it'll be an arrow with the text field. Just give us some time
Or may be you have some suggestions?
-
- Кандидат
- Сообщения: 98
- Зарегистрирован: 02 апр 2010, 19:10
- Репутация: 0
- Заслуга: Tester
- Контактная информация:
Re: dxfpoint
Ok ! I wait for !
-
- Новичок
- Сообщения: 5
- Зарегистрирован: 04 янв 2012, 23:34
- Репутация: 0
- Контактная информация:
Re: dxfpoint
I too am looking forward to this update. I would like the ability to set the centre of circle to the DXF point.
Many thanks for this excellent Inkscape extention
Many thanks for this excellent Inkscape extention
- Nick
- Мастер
- Сообщения: 22776
- Зарегистрирован: 23 ноя 2009, 16:45
- Репутация: 1735
- Заслуга: Developer
- Откуда: Gatchina, Saint-Petersburg distr., Russia
- Контактная информация:
Re: dxfpoint
As a quick fix, you can add snapping to the center of rotation and to the sharp angles, then you can easily place the circles exact at the points. You can find useful, to press SpaceBar while draggin the object - that will create a copy of it.
-
- Новичок
- Сообщения: 5
- Зарегистрирован: 04 янв 2012, 23:34
- Репутация: 0
- Контактная информация:
Re: dxfpoint
thanks for the quick fix. worked well