[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i25
CONFIG="num_encoders=6 sserial_port_0=000xxx"




[EMC]

# Name of machine, for use with display, etc.
MACHINE =               HM2-Servo

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
#DEBUG =                0x00000003
#DEBUG =                0x00000007
DEBUG = 0x0



[DISPLAY]

# Name of display program, e.g., tkemc
DISPLAY =              axis
LATHE = 1 

# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.0500

# Path to help file
HELP_FILE =             tkemc.txt

# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.5

# Prefix to be used
PROGRAM_PREFIX = ../../nc_files/

# Introductory graphic
INTRO_GRAPHIC =         emc2.gif
INTRO_TIME =            5

PYVCP = pyvcp-panel.xml
GLADEVCP= in-out-pins.glade


[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python


[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.010




[RS274NGC]

# File containing interpreter variables
PARAMETER_FILE = hm2-servo.var
RS274NGC_STARTUP_CODE = G18




[EMCMOT]

EMCMOT =                motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# Servo task period, in nanoseconds
SERVO_PERIOD =          500000




[HAL]
#вкл пины halui
HALUI = halui 

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.

# list of hal config files to run through halcmd
# files are executed in the order in which they appear

HALFILE = hm2-servo7i77.hal
#HALFILE = CNC_machine.hal
#HALFILE = custom.hal
POSTGUI_HALFILE = postgui_call_list.hal
#SHUTDOWN = shutdown.hal


# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =               save neta




[TRAJ]

AXES =                  3
# COORDINATES =         X Y Z R P W
# COORDINATES =           X Y Z
COORDINATES =         X Z 

# HOME =                  0 0 0 0
LINEAR_UNITS =          mm
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =      20.0
MAX_VELOCITY =          10.0
DEFAULT_ACCELERATION =  40.0
MAX_ACCELERATION =      50.0
NO_FORCE_HOMING = 1




[AXIS_0]

TYPE =                  LINEAR
MAX_VELOCITY =          10.0
MAX_ACCELERATION =      50.0
BACKLASH =              0.000
FERROR =                10.5
MIN_FERROR =            10.5

INPUT_SCALE =           2500

OUTPUT_SCALE =          -1.000
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            10

MIN_LIMIT =             -500.0
MAX_LIMIT =             500.0
HOME =                  0.000
HOME_OFFSET =           -2.9
HOME_SEARCH_VEL =       -0.50
HOME_LATCH_VEL =        0.10
# the X axis servo's encoder does not have an index channel, so we have to home without index
HOME_USE_INDEX =        YES
HOME_IGNORE_LIMITS =    YES

# PID tuning params
DEADBAND =              0.000015
P =                     20
I =                     0
D =                     0
FF0 =                   0
FF1 =                   1
FF2 =			0
BIAS =                  0




[AXIS_1]

TYPE =                  LINEAR
MAX_VELOCITY =          1.0
MAX_ACCELERATION =      4.0
BACKLASH =              0.000
FERROR =                10.010
MIN_FERROR =            10.002

INPUT_SCALE =           2500

OUTPUT_SCALE =          1.000
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            1

MIN_LIMIT =             -3.0
MAX_LIMIT =             10.0
HOME =                  0.000
HOME_OFFSET =           -2.9
HOME_SEARCH_VEL =       -0.50
HOME_LATCH_VEL =        0.10
# the Y axis servo's encoder has an index channel, so we use it to improve the home accuracy
HOME_USE_INDEX =        YES
HOME_IGNORE_LIMITS =    YES

# PID tuning params
DEADBAND =              0.000015
P =                     100
I =                     0
D =                     0
FF0 =                   0
FF1 =                   1
FF2 =			0
BIAS =                  0




[AXIS_2]

TYPE =                  LINEAR
MAX_VELOCITY =          1.0
MAX_ACCELERATION =      4.0
BACKLASH =              0.000
FERROR =                10.010
MIN_FERROR =            10.002

INPUT_SCALE =           81920

OUTPUT_SCALE =          -1.000
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            1

MIN_LIMIT =             -3.0
MAX_LIMIT =             3.0
HOME =                  0.0
HOME_OFFSET =           -2.9
HOME_SEARCH_VEL =       -0.50
HOME_LATCH_VEL =        0.10
# the Z axis servo's encoder does not have an index channel, so we have to home without index
HOME_USE_INDEX =        NO
HOME_IGNORE_LIMITS =    YES

# PID tuning params
DEADBAND =              0.000015
P =                     100
I =                     0
D =                     0
FF0 =                   0
FF1 =                   1
FF2 =			0
BIAS =                  0




[EMCIO]

# Name of IO controller program, e.g., io
EMCIO =                 io

# cycle time, in seconds
CYCLE_TIME =            0.100

# tool table file
TOOL_TABLE = tool.tbl
TOOL_CHANGE_WITH_SPINDLE_ON = 1
RANDOM_TOOLCHANGER = 1