------ WIRE POST PROCESSORS ------


5ACHS.CNC
      *Set to dual units

AGIE-DIE.CNC
      Agiecut Challenge with Agievision 2 control.
      Use with PostToAgie.bas macro to generate
      SBL file.
      See AGIE-DIE.TXT for notes on this post.

AGIE-ISO.CNC
      Agiecut Challenge with Agievision 2 control.
      Use with PostToAgie.bas macro to generate
      ISO file.
      Modified for 4x use.
      *Set to dual units
      See AGIE-ISO.TXT for notes on this post.

AGIE100.CNC
      *Set to dual units
      See AGIE100.TXT for notes on this post.

AGIE100C.CNC
      Agiecut 100C*Set to dual units

AGIE123.CNC
      See AGIE123.TXT for notes on this post.

AGIE200.CNC

AGIE200N.CNC

ANDREW.CNC

BRAUN.CNC
      *Set to dual units

BRAUNING.CNC
      *Set to dual units

broHS50A.CNC
      Brother HS50A

Brother_HS-70A.CNC
      Brother_HS-70A.
      Created @ Delcam USA by D.C. on 12-30-05.

CHAR-2.CNC

CHAR-FAN.CNC
      See CHAR-FAN.TXT for notes on this post.

CHAR-UP.CNC

CHARMI.CNC

CHARMILL.CNC
      See CHARMILL.TXT for notes on this post.

Charmille ROBOFIL 2050TW.CNC
      Charmilles Robofill 2050TW Czech Republic
      *Set to dual units

Charmille Robofil 290P.CNC

Charmilles Robofil 240 Fanuc.CNC
      Charmilles Robofil 240 with Fanuc controller with XYIJUVKL 4 axis moves.
      Last edit by DELCAM BRNO, s.r.o. 3/2008
      G60 and G61 for all ISO or Cone tapers on conture. Can't use variable taper type.
      Rename Setup Name for your program number.

Charmilles Robofil 290P.CNC
      Charmilles Robofil 290p for Nastrojarna MM - Metric.
      Last edit by DELCAM BRNO, s.r.o. 3/2008
      All taper types support - tested on Orange HMI from Charmilles

CHARMM.CNC
      *Set to dual units
      See CHARMM.TXT for notes on this post.

CHARUV.CNC
      Special post for Charmilles wire EDM Machines using XYUV cycles.
      Feature location is used to input "W" value.
      To use G41/G42 in an XYUV program, you must manually type in the code and 
      compensation number (G42D18) in parameter P1,P2 or P3.

CYL_DIE.CNC
      Special post to creat script output (SBL file).
      Use this for non-tapered 2 axis die.

CYL_PUNC.CNC
      Special post to creat script output (SBL file).
      Use this for non-tapered 2 axis punch.

DIE-CSTN.CNC
      Special post to creat script output (SBL file).
      Use this for 2 axis die with conical taper.

Edm9.cnc
      *Set to dual units

EROTEC1.CNC

EVOL-MAT.CNC

EVOLUT.CNC

F200_ABS.CNC
      See F200_ABS.TXT for notes on this post.

F200_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as F200_abs.cnc

FAN-ALP3.CNC

FAN-ALPH.CNC
      Standard Fanuc Postprocessor for Fanuc ALPHA-Series
      All function same as Fan-Abs.CNC
      Output of M37, M38, M29 when doing multiple (rough& finish) passes

Fan-alt2.cnc

FAN-AWF.CNC

FAN200C.CNC

FANUC.CNC

FAN_ABS.CNC
      See FAN_ABS.TXT for notes on this post.

FAN_ALT.CNC
      See FAN_ALT.TXT for notes on this post.

FAN_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as Fan_abs.cnc

FAN_ISO.CNC

FAPT-H.CNC
      Special post to creat profile output in Fanuc FAPT format
      Imported to Fanuc PG system.

FIL2AX.CNC
      *Converted to dual units
      See FIL2AX.TXT for notes on this post.

FIL4AX.CNC
      *Converted to dual units
      See FIL4AX.TXT for notes on this post.

GAMM.CNC

hansDS2.CNC
      Hansvedt DS-2

HITACI.CNC
      General post for Hitachi wire EDM Machines.

HITACM.CNC

HITA_ABS.CNC
      See HITA_ABS.TXT for notes on this post.

HITA_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as Hita_abs.cnc

JAPAX4G.CNC
      See JAPAX4G.TXT for notes on this post.

JPXSIA.CNC
      Japax Straight Absolute.
      It is designed to be used when programming straight cuts in absolute mode.

JPXSII.CNC
      *Converted to dual units
      Japax Straight Incremental.
      It is designed to be used when programming straight cuts in incremental mode.

JPXSMA.CNC
      Japax Straight Absolute.
      It is designed to be used when programming straight cuts in absolute mode.

JPXSMI.CNC
      Japax Straight Incremental.
      It is designed to be used when programming straight cuts in incremental mode.

JPXTIA.CNC
      Japax Taper Absolute.
      It is designed to be used when programming taper cuts in absolute mode.

JPXTII.CNC
      *Set to dual units
      Japax Taper Incremental.
      It is designed to be used when programming taper cuts in incremental mode.

JPXTMA.CNC
      Japax Taper Absolute.
      It is designed to be used when programming taper cuts in absolute mode.

JPXTMI.CNC
      Japax Taper Incremental.
      It is designed to be used when programming taper cuts in incremental mode.

KOORD.CNC

LASER-1.CNC

LASER-2.CNC

MAKI_ABS.CNC
      See MAKI_ABS.TXT for notes on this post.

MAKI_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as Maki_abs.cnc

MC1.CNC

MGV2AX.CNC
      *Converted to dual units
      Special Post for Charmilles Wire EDM Machine Series #1000,2000,4000 and 6000.
      This post is the same as FIL2AX post, except that it does not put in a M9 at 
      the beginning of the program.

MGV4AX.CNC
      *Converted to dual units
      Special Post for Charmilles Wire EDM Machine
      Series #1000,2000,4000 and 6000. Use this post when doing any 4 axis work (xyuv).
      This post is same as FIL4AX post, except does not put a M9 at the beginning of the program.

mit200HA.CNC
      Mitsubishi 200HA*Set to dual units

MitFX10.CNC
      Mitsubishi FX-10
      No support for arcs in 4-axis

MitFX10a.CNC
      Mitsubishi FX-10
      Has support for arcs in 4-axis

MITSRA90.CNC
      Mitsubishi RA90

Mitsub.CNC

MITSUI.CNC
      General post for Mitsubishi wire EDM Machines.

MITS_ABS.CNC
      See MITS_ABS.TXT for notes on this post.

Mits_FXK.CNC
      Mitsubishi FX-K*Set to dual units

Mits_H30.CNC

Mits_H70.CNC

MITS_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as Mits_abs.cnc

OFF-LINK.CNC
      Special post to creat script output (SBL file).
      Use this for non-taper 2 axis side with a left offset.

OFF-REC.CNC
      Special post to creat script output (SBL file).
      Use this for non-taper 2 axis side with a right offset.

PUNCH-IS.CNC
      Special post to creat script output (SBL file).
      Use this for 2 axis punch with ISO (cylinderical) taper.

RoboFil 300.CNC
      *Converted to dual units

SCRIPT.CNC

SOD4_ABS.CNC
      Sodick Postprocessor for special control type using 4-digit output
      for high accuracy machining (0.0001 mm)
      Absolute coordinates (G90)
      All other functions same as Sodi_abs.cnc

Sodick Model LN1W inch.CNC
      *Set to dual units

SODICKDI.CNC
      *Set to dual units
      See SODICKDI.TXT for notes on this post.

SODICKDM.CNC

SODICKTI.CNC
      SODICK TAPE. Use this post if planning to produce a paper tape or if downloading
      Via RS232 directly to the wire machine.
      All other functions same as SODICKDI.cnc

SODICKTM.CNC

Sodick_AQ325L.CNC
      Sodick_AQ325L.
      LQ1W, Control.
      Created @ Delcam USA by D.C. on 12-27-05.\*Set to dual units

soditech.cnc
      Latest Sodick Postprocessor from Soditech England

SODI_ABS.CNC
      See SODI_ABS.TXT for notes on this post.

SODI_INK.CNC
      Incremental Coordinates (G91)
      All other functions same as Sodi_abs.cnc

SODJAPAX.CNC
      *Set to dual units
      This post is designed for a newer Japax machine with a Sodick
      control. The power condition is set by entering the value using
      the <P1> parameter.  Flushing is control by entering the value
      using <P2> parameter.

STANZER.CNC

W_Both_Ver.001.CNC
      Fanuc & Makino wire controls
      Metric units
      Incremental positioning, 
      P1=program number
      P2=Comment

W_FANUC_Ver.001.CNC
      Fanuc wire EDM
      Metric units
      Incremental positioning
      P1=program number
      P2=Comment

W_MAKINO_Ver.001.CNC
      Makino wire EDM
      Metric units
      Incremental positioning
      P2=Comment

W_Multi&XYUV_Ver.001.CNC
      Fanuc 4 axis (xyuv)  wire EDM
      Metric units
      P1=program number
      P2=Comment

W_Nomal_Ver.001.CNC
      Fanuc wire EDM
      Metric units
      Incremental positioning
      P1=program number
      P2=Comment