%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21 (All units in mm)
G61
(Start cutting path id: path5599)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X12.497153 Y13.234360

G01 Z-0.700000 F400.0(Penetrate)
G02 X12.144744 Y12.845936 Z-0.700000 I-4.171167 J3.430334 F600.000000
G02 X11.756320 Y12.493527 Z-0.700000 I-3.818758 J3.818758
G02 X12.148940 Y12.145750 Z-0.700000 I-3.380372 J-4.211759
G02 X12.505972 Y11.761527 Z-0.700000 I-3.772992 J-3.863982
G02 X12.854079 Y12.149631 Z-0.700000 I4.189663 J-3.407720
G02 X13.237986 Y12.502361 Z-0.700000 I3.841556 J-3.795823
G02 X12.849883 Y12.850461 Z-0.700000 I3.407683 J4.189693
G02 X12.497153 Y13.234360 Z-0.700000 I3.795786 J3.841593
G01 X12.497153 Y13.234360 Z-0.700000
G00 Z3.000000

(End cutting path id: path5599)


(Start cutting path id: path5597)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X12.505972 Y14.486750

G01 Z-0.700000 F400.0(Penetrate)
G02 X11.658253 Y13.336175 Z-0.700000 I-4.164132 J2.180465 F600.000000
G02 X10.503958 Y12.493527 Z-0.700000 I-3.316413 J3.331040
G02 X11.653482 Y11.649872 Z-0.700000 I-2.174187 J-4.167413
G02 X12.497153 Y10.500361 Z-0.700000 I-3.323711 J-3.323758
G02 X13.340824 Y11.649872 Z-0.700000 I4.167382 J-2.174246
G02 X14.490347 Y12.493527 Z-0.700000 I3.323711 J-3.323758
G02 X13.345581 Y13.338237 Z-0.700000 I2.186353 J4.161043
G02 X12.505972 Y14.486750 Z-0.700000 I3.331119 J3.316333
G01 X12.505972 Y14.486750 Z-0.700000
G00 Z3.000000

(End cutting path id: path5597)


(Start cutting path id: path5595)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X12.329583 Y21.004305

G01 Z-0.700000 F400.0(Penetrate)
G01 X12.329583 Y16.665138 Z-0.700000 F600.000000
G02 X11.161012 Y13.835918 Z-0.700000 I-4.000398 J-0.003631
G02 X8.334375 Y12.661111 Z-0.700000 I-2.831827 J2.825590
G01 X4.004028 Y12.661111 Z-0.700000
G01 X4.004028 Y12.334805 Z-0.700000
G01 X8.334375 Y12.334805 Z-0.700000
G02 X11.161022 Y11.159988 Z-0.700000 I-0.005190 J-4.000397
G02 X12.329583 Y8.330749 Z-0.700000 I-2.831837 J-2.825580
G01 X12.329583 Y4.000416 Z-0.700000
G01 X12.664722 Y4.000416 Z-0.700000
G01 X12.664722 Y8.330749 Z-0.700000
G02 X12.968531 Y9.863597 Z-0.700000 I4.000398 J0.003658
G02 X13.836401 Y11.163107 Z-0.700000 I3.696590 J-1.529191
G02 X15.135904 Y12.030986 Z-0.700000 I2.828720 J-2.828700
G02 X16.668750 Y12.334805 Z-0.700000 I1.529217 J-3.696579
G01 X20.999097 Y12.334805 Z-0.700000
G01 X20.999097 Y12.661111 Z-0.700000
G01 X16.668750 Y12.661111 Z-0.700000
G02 X15.135911 Y12.964927 Z-0.700000 I-0.003629 J4.000398
G02 X13.836411 Y13.832799 Z-0.700000 I1.529210 J3.696582
G02 X12.968539 Y15.132299 Z-0.700000 I2.828710 J2.828710
G02 X12.664722 Y16.665138 Z-0.700000 I3.696582 J1.529210
G01 X12.664722 Y21.004305 Z-0.700000
G01 X12.329583 Y21.004305 Z-0.700000
G01 X12.329583 Y21.004305 Z-0.700000
G00 Z3.000000

(End cutting path id: path5595)


(Start cutting path id: path5593)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X11.632847 Y21.701041

G01 Z-0.700000 F400.0(Penetrate)
G01 X11.632847 Y16.665138 Z-0.700000 F600.000000
G02 X10.666204 Y14.333310 Z-0.700000 I-3.300329 J0.001857
G02 X8.334375 Y13.366666 Z-0.700000 I-2.333686 J2.333686
G01 X3.298472 Y13.366666 Z-0.700000
G01 X3.298472 Y11.629250 Z-0.700000
G01 X8.334375 Y11.629250 Z-0.700000
G02 X10.666214 Y10.662596 Z-0.700000 I-0.001857 J-3.300329
G02 X11.632847 Y8.330749 Z-0.700000 I-2.333696 J-2.333676
G01 X11.632847 Y3.303694 Z-0.700000
G01 X13.370278 Y3.303694 Z-0.700000
G01 X13.370278 Y8.330749 Z-0.700000
G02 X14.336912 Y10.662596 Z-0.700000 I3.300329 J-0.001829
G02 X16.668750 Y11.629250 Z-0.700000 I2.333696 J-2.333676
G01 X21.695833 Y11.629250 Z-0.700000
G01 X21.695833 Y13.366666 Z-0.700000
G01 X16.668750 Y13.366666 Z-0.700000
G02 X14.336922 Y14.333310 Z-0.700000 I0.001857 J3.300329
G02 X13.370278 Y16.665138 Z-0.700000 I2.333686 J2.333686
G01 X13.370278 Y21.701041 Z-0.700000
G01 X11.632847 Y21.701041 Z-0.700000
G01 X11.632847 Y21.701041 Z-0.700000
G00 Z3.000000

(End cutting path id: path5593)


(Start cutting path id: path5591)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X10.936111 Y22.397777

G01 Z-0.700000 F400.0(Penetrate)
G01 X10.936111 Y16.665138 Z-0.700000 F600.000000
G02 X10.738457 Y15.669272 Z-0.700000 I-2.600259 J-0.001463
G02 X10.174508 Y14.825010 Z-0.700000 I-2.402605 J0.994404
G02 X9.330243 Y14.261065 Z-0.700000 I-1.838656 J1.838666
G02 X8.334375 Y14.063416 Z-0.700000 I-0.994391 J2.402611
G01 X2.601736 Y14.063416 Z-0.700000
G01 X2.601736 Y10.932500 Z-0.700000
G01 X8.334375 Y10.932500 Z-0.700000
G02 X9.330249 Y10.734848 Z-0.700000 I0.001477 J-2.600259
G02 X10.174518 Y10.170897 Z-0.700000 I-0.994397 J-2.402608
G02 X10.738465 Y9.326625 Z-0.700000 I-1.838666 J-1.838656
G02 X10.936111 Y8.330749 Z-0.700000 I-2.402613 J-0.994384
G01 X10.936111 Y2.598139 Z-0.700000
G01 X14.067014 Y2.598139 Z-0.700000
G01 X14.067014 Y8.330749 Z-0.700000
G02 X14.264660 Y9.326625 Z-0.700000 I2.600259 J0.001491
G02 X14.828607 Y10.170897 Z-0.700000 I2.402613 J-0.994384
G02 X15.672876 Y10.734848 Z-0.700000 I1.838666 J-1.838656
G02 X16.668750 Y10.932500 Z-0.700000 I0.994397 J-2.402608
G01 X22.401389 Y10.932500 Z-0.700000
G01 X22.401389 Y14.063416 Z-0.700000
G01 X16.668750 Y14.063416 Z-0.700000
G02 X15.672882 Y14.261065 Z-0.700000 I-0.001477 J2.600259
G02 X14.828617 Y14.825010 Z-0.700000 I0.994391 J2.402611
G02 X14.264668 Y15.669272 Z-0.700000 I1.838656 J1.838666
G02 X14.067014 Y16.665138 Z-0.700000 I2.402605 J0.994404
G01 X14.067014 Y22.397777 Z-0.700000
G01 X10.936111 Y22.397777 Z-0.700000
G01 X10.936111 Y22.397777 Z-0.700000
G00 Z3.000000

(End cutting path id: path5591)


(Start cutting path id: path5589)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X10.230556 Y23.103333

G01 Z-0.700000 F400.0(Penetrate)
G01 X10.230556 Y16.665138 Z-0.700000 F600.000000
G02 X9.674002 Y15.325516 Z-0.700000 I-1.900186 J0.004019
G02 X8.334375 Y14.768972 Z-0.700000 I-1.343632 J1.343642
G01 X1.896181 Y14.768972 Z-0.700000
G01 X1.896181 Y10.235749 Z-0.700000
G01 X8.334375 Y10.235749 Z-0.700000
G02 X9.061427 Y10.089496 Z-0.700000 I-0.004003 J-1.900186
G02 X9.677123 Y9.676080 Z-0.700000 I-0.731055 J-1.753933
G02 X10.087678 Y9.058472 Z-0.700000 I-1.346751 J-1.340516
G02 X10.230556 Y8.330749 Z-0.700000 I-1.757306 J-0.722909
G01 X10.230556 Y1.901388 Z-0.700000
G01 X14.763750 Y1.901388 Z-0.700000
G01 X14.763750 Y8.330749 Z-0.700000
G02 X14.907467 Y9.060511 Z-0.700000 I1.900184 J0.004816
G02 X15.320297 Y9.679203 Z-0.700000 I1.756467 J-0.724946
G02 X15.938988 Y10.092032 Z-0.700000 I1.343637 J-1.343637
G02 X16.668750 Y10.235749 Z-0.700000 I0.724946 J-1.756467
G01 X23.098125 Y10.235749 Z-0.700000
G01 X23.098125 Y14.768972 Z-0.700000
G01 X16.668750 Y14.768972 Z-0.700000
G02 X15.941030 Y14.911848 Z-0.700000 I-0.004814 J1.900184
G02 X15.323425 Y15.322400 Z-0.700000 I0.722905 J1.757308
G02 X14.910007 Y15.938091 Z-0.700000 I1.340511 J1.346756
G02 X14.763750 Y16.665138 Z-0.700000 I1.753929 J0.731065
G01 X14.763750 Y23.103333 Z-0.700000
G01 X10.230556 Y23.103333 Z-0.700000
G01 X10.230556 Y23.103333 Z-0.700000
G00 Z3.000000

(End cutting path id: path5589)


(Start cutting path id: path5587)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X9.533819 Y23.800069

G01 Z-0.700000 F400.0(Penetrate)
G01 X9.533819 Y16.665138 Z-0.700000 F600.000000
G02 X9.182313 Y15.817201 Z-0.700000 I-1.200120 J0.000675
G02 X8.334375 Y15.465694 Z-0.700000 I-0.848613 J0.848613
G01 X1.199444 Y15.465694 Z-0.700000
G01 X1.199444 Y9.530194 Z-0.700000
G01 X8.334375 Y9.530194 Z-0.700000
G02 X9.182313 Y9.178687 Z-0.700000 I-0.000675 J-1.200120
G02 X9.533819 Y8.330749 Z-0.700000 I-0.848613 J-0.848613
G01 X9.533819 Y1.195833 Z-0.700000
G01 X15.469306 Y1.195833 Z-0.700000
G01 X15.469306 Y8.330749 Z-0.700000
G02 X15.820812 Y9.178687 Z-0.700000 I1.200120 J-0.000675
G02 X16.668750 Y9.530194 Z-0.700000 I0.848613 J-0.848613
G01 X23.803681 Y9.530194 Z-0.700000
G01 X23.803681 Y15.465694 Z-0.700000
G01 X16.668750 Y15.465694 Z-0.700000
G02 X15.820812 Y15.817201 Z-0.700000 I0.000675 J1.200120
G02 X15.469306 Y16.665138 Z-0.700000 I0.848613 J0.848613
G01 X15.469306 Y23.800069 Z-0.700000
G01 X9.533819 Y23.800069 Z-0.700000
G01 X9.533819 Y23.800069 Z-0.700000
G00 Z3.000000

(End cutting path id: path5587)


(Start cutting path id: path5585)
(Change tool to Cylindrical cutter)

G00 Z3.000000
G00 X8.837083 Y24.496805

G01 Z-0.700000 F400.0(Penetrate)
G01 X8.837083 Y16.665138 Z-0.700000 F600.000000
G02 X8.799535 Y16.472344 Z-0.700000 I-0.500043 J-0.002665
G02 X8.690629 Y16.308884 Z-0.700000 I-0.462494 J0.190129
G02 X8.527169 Y16.199979 Z-0.700000 I-0.353589 J0.353589
G02 X8.334375 Y16.162430 Z-0.700000 I-0.190129 J0.462494
G01 X0.502708 Y16.162430 Z-0.700000
G01 X0.502708 Y8.833472 Z-0.700000
G01 X8.334375 Y8.833472 Z-0.700000
G02 X8.527173 Y8.795922 Z-0.700000 I0.002666 J-0.500043
G02 X8.690634 Y8.687013 Z-0.700000 I-0.190132 J-0.462493
G02 X8.799539 Y8.523548 Z-0.700000 I-0.353594 J-0.353584
G02 X8.837083 Y8.330749 Z-0.700000 I-0.462498 J-0.190119
G01 X8.837083 Y0.499083 Z-0.700000
G01 X16.166042 Y0.499083 Z-0.700000
G01 X16.166042 Y8.330749 Z-0.700000
G02 X16.203586 Y8.523548 Z-0.700000 I0.500043 J0.002680
G02 X16.312491 Y8.687013 Z-0.700000 I0.462498 J-0.190119
G02 X16.475952 Y8.795922 Z-0.700000 I0.353594 J-0.353584
G02 X16.668750 Y8.833472 Z-0.700000 I0.190132 J-0.462493
G01 X24.500417 Y8.833472 Z-0.700000
G01 X24.500417 Y16.162430 Z-0.700000
G01 X16.668750 Y16.162430 Z-0.700000
G02 X16.475956 Y16.199979 Z-0.700000 I-0.002665 J0.500043
G02 X16.312496 Y16.308884 Z-0.700000 I0.190129 J0.462494
G02 X16.203590 Y16.472344 Z-0.700000 I0.353589 J0.353589
G02 X16.166042 Y16.665138 Z-0.700000 I0.462494 J0.190129
G01 X16.166042 Y24.496805 Z-0.700000
G01 X8.837083 Y24.496805 Z-0.700000
G01 X8.837083 Y24.496805 Z-0.700000
G00 Z3.000000

(End cutting path id: path5585)


(Footer)
M5
G00 X0.0000 Y0.0000
M2
(Using default footer. To add your own footer create file "footer" in the output dir.)
(end)
%