Machine
parameters
The settings for
machine parameters can be accessed via the
'Options/Machine'
menu item.
X and Y coordinates of
table origin
These are the
absolute coordinates of the bottom left hand corner of the table.
Table width
This is the width
of the table (X axis).
Table depth
This is the depth
of the table (Y axis).
Max clearance
between the chuck and the table
This is the
maximum
available clearance on the Z axis (i.e. the clearance between the chuck
and table with the Z axis raised to the maximum height). It is used to
work out if it is possible to fit the work on the machine.
Note: As with any input boxes you
can enter values in any measurement system. See 'Entering values' for more information.
Back to 'Machine and material
parameters'