This software is registered to : |  :
This software is unregistered.| .
Evaluation days remaining: | ,  : 
Evaluation has expired|   
Serial number:| :
Please enter a fault description| 
Starting SheetCam...| SheetCam...
SheetCam|SheetCam
Part Center: X | X 
Mirror X| X
Show input paths| 
Show segment ends| 
Show path ends| 
Show tool | 
Show tool paths| 
Show rapid moves|
Show path directions| 
Show machine and work|  
Show start points| 
ToolButton4|ToolButton4
Generate tool paths|  
Waiting for path generator|,  
Run post processor| 
Toolbox| 
Open tool box|  
Estimate|
Estimate cut time| 
ToolButton5|ToolButton5
Zoom in (PgUp)| + (PgUp)
Zoom in| +
Zoom out (PgDn)| - (PgDn)
Zoom Out| -
Zoom to fit current part| 
Zoom to fit job| 
Zoom window| 
Zoom to a window| 
Zoom to fit material| 
Zoom to fit machine| 
ToolButton10|ToolButton10
MouseDrag| 
Scroll the screen with the mouse|
CursorStart|
Place cut start point| 
Tabs|
Place holding tabs|  .
Contour properties| 
Edit contour properties| 
Move part|
ToolButton22|ToolButton22
ToolButton25|ToolButton25
CalcStopped| 
New contour| 
Create a new contour process|   
New fill| 
Create a new fill process|   
New plasma cut|  
Create a new plasma cut process|    
Drilling|
Create a new drilling process|   
Tapping|
Create a new tapping process|   
Insert code| 
Insert code directly into the output file|    
Set post variable|  
Set post processor variable|   
New mill/router| /
Add a new mill/router tool|   /
New plasma cutter|  
Add a new plasma cutter tool|   
New code snippet|  
Add new code snippet|   
&File|&
New job| 
Start a new job|  
Open job| 
Open job file|  
Recent jobs| 
Save job| 
Save job file|  
Save job as|  ...
Save job file as|   ...
New part| 
Create a new part|  
&Open part|& 
Recent parts| 
Save part| 
Save part as|  
Open drawing| 
Recent drawings| 
Open tool set|  
Load a tool set|  
Save tool set|  
Save current tools|  
Load default tools|   
Save as default tools|   
Save defaults on exit|     
Save process| 
Save the current process|  
Load process| 
Load a process|  
&Print|&
Print the current display|  
&Exit|&
&Edit|&
Undo|
Undo the last action|  
&View|&
DNC tool| DNC
Show DNC tool| DNC 
Layer tool| .
Show layer toolbox|  
Colour legend| 
Open colour legend toolbox| 
&Tools|&
&Processes|&
&Options|&
Tool change| 
Set up tool change|  
&Material|&
M&achine|M&a
Complexity|
Allow multiple parts|  
Plasma cutting| 
Rotary cutting| 
Start point size|  
Direction arrow size|  
Direction arrow frequency| 
Number of vectors per direction arrow| 
Units|. .
System parameters| 
Select language| 
Post processor units|  
Metric|
Post processor output in metric|.. 
Inch|
Post processor output in inches|   
&Select post processor|&  
Open post processor| 
G-code file extension|  G-code
Post output to last drawing folder|  
&Colours|&
Colour scheme: White| : 
Colour scheme: Black| : 
Reopen last job on startup|    
Reverse mouse wheel|  
Use lower left coordinates|  
&Help|&
Tutorials|
Setup wizard| 
Run the setup wizard|  
About| 
Utilities|
Update language file|  
Open licence| 
Create a support file|   
Enter serial number|  
&Open|&
&Enable|&
Enable this process|  
Disable|
Disable this process|  
&Delete|&
Properties|
&Clear all|& 
&Properties|&
Move to layer|  
New layer| 
Create a new layer|  
Copy to layer|  
&New layer|& 
&Copy|&
Copy this part| 
&Duplicate|&
Create a duplicate of this part|   
Align|
&Array|&
Delete|
Delete this part|  
Enable|
Enable/disable part|/ 
Set bump increment|  
Set grid size|  
Part cut order| 
Copy from| 
Delete all tabs|  
Measure|
Measure a distance| 
End measuring| .
Finish measuring| .
Units setup| . 
Linear units| .
Angular units| .
Feed rate| 
Thread pitch| 
&OK|&OK
Create a new layer name|   
Enter the new layer name|   
&Cancel|&
Edit contour| 
Basic|
Contour method| 
Tool|
Cut depth| 
Z increment|Z 
Finish allowance| 
Layer|
Spindle speed| 
Plunge Rate| 
Start depth| 
Inside offset|
Outside offset|
No offset| 
Edit...|...
Coolant|
Flood|
Mist|
Cut start| 
Ramp angle| 
Cut path| 
Angle threshold| 
Tab length| 
Tab thickness| 
Offset open paths|  
Overcut corners|  
Climb cut| 
Reverse open paths|  
Reverse open cut paths to save time|   ,   
Notes|
DebugForm| 
Setup machine parameters|  
X coordinate of machine origin|  
Y coordinate of machine origin|  Y
Table X size|  X 
Table Y size|  Y
Max clearance between chuck and table|     
Working envelope X size|   X 
Working envelope Y size|   Y 
X coordinate of table bottom left|X   
Y coordinate of table bottom left|Y   
&Load machine|& 
&Save machine|& 
Machine origin| 
Top right| 
Bottom left| 
Middle left| 
Bottom middle| 
Bottom right| 
Middle right| 
Centre| 
Top middle| 
Top left| 
Enter coordinates| 
Enter absolute position|  
Memory usage| 
MsgLabel| 
Edit plasma cutter|  
Tool name| 
Kerf width| 
Tool number| 
Pierce delay| 
Pause at end of cut|   
Pierce height| 
Cut height| 
Plunge rate| 
Preheat|
Automatically generate name| 
Ramp lead in|  
&Update processes|& 
Apply the tool defaults to any processes that use this tool|       ,    
Edit plasma cut|   
Loop sharp corners|   
Loop size| 
Reverse cut direction|  
Edit pocket| 
Step over|
Fill angle| 
Pocket method| 
Spiral pocket| 
Edit tool| 
V angle|V 
Flute length| 
Tool type| 
Tool projection| 
Diameter|
Tool length offset|  
Mill/Router|/
Drill|
V cutter|V 
Automatic tap| 
Rigid tap| 
Spindle rotation| 
CW|CW
CCW|CCW
Off|Off
SheetCam version 0.0.0.1| SheetCam 0.0.0.1
Copyright 2003 Les Newell|Copyright 2003 Les Newell
EMail: |: 
les@sheetcam.com|les@sheetcam.com
Support group: |Support group: 
http://www.groups.yahoo.com/group/sheetcam|http://www.groups.yahoo.com/group/sheetcam
Home page: |: 
http://www.sheetcam.com|http://www.sheetcam.com
&Register...|&...
Processing paths| 
Set direction arrow size|   
ValueText| 
Material setup| 
Thickness of material| 
X Coordinate of bottom left corner|X    
Y Coordinate of bottom left corner|Y    
X size|X 
Y size|Y 
Rapid clearance| 
Height of bottom of material above table|    
Parking position| 
X position|X 
Y position|Y 
Z position|Z 
Use X position|  
Use Y position| Y 
Use Z position| Z 
Edit G-code| G-code
Use code snippet|  
Variable name| 
Value|
Layers|
Edit layer name|  
Edit layer name (Dbl click)|   ( )
Enable all| 
Disable all| 
Invert selection| 
DNC|DNC
Send data| 
Configure >>| >>
Port settings| 
Comm port|Comm 
Baud rate| 
Parity|
Stop bits| 
Flow control|  
Byte size| 
Com 1|Com 1
Com 2|Com 2
Com 3|Com 3
Com 4|Com 4
110|110
300|300
600|600
1200|1200
2400|2400
4800|4800
9600|9600
14400|14400
19200|19200
38400|38400
56000|56000
57600|57600
115200|115200
128000|128000
2560000|2560000
None|
Even|
Odd|
Mark|
Space|
1.5|1.5
Software|
Hardware| 
Serial port| 
Run external command|  
Command settings| 
Command|
Run in a DOS box|  DOS
Wait for command to finish|    
Keep open when command finishes|  
Auto send after post processing|    
New g-code snippet|  g-code
Code name| 
Colours|
Run code before toolchange|   
Run code after toolchange|    
Import link tolerance| 
Circle recognition limit|  
Default drill hole tolerance|   
Max detail reduction error|.  
Auto backup interval|  
Remove duplicate lines|  
Do not prompt for updates|    
Finish Depth| 
Peck depth|  
Peck retract| 
Min hole size|.  
Max hole size|Max.  
Enter new coordinates|  
XLabel|X 
YLabel|Y 
Start point properties|  
Use Code snippet|  
Order|
OrderOutof| 
Lead in| 
Size|
Arc|Arc
Tangent|
Perpendicular|
Lead Out|
Use process settings|  
PostNotes| 
PathOptions| 
Path optimisation| 
Start point| 
Optimise now|
Preferred cut direction|  
Auto|
Manual|
Cutting rules| 
All inside first|  
Shortest path|  
Keep parts together|  
Rapid speed| 
Calculate|
Machining type| 
Plasma|
Mill/router|/
Plasma cutting wizard|  
Create support file|  
Create file| 
Program settings| 
Post processor| 
G-code|G-code
Original drawing(s)| ()
Job file|Job 
Create and email file|  
SelectPart| 
Form1|1
Drawing options| 
File scale|..
File is in inches|
File is metric|
Use points for drilling|   
Origin|
Bottom left = 0,0| 
Drawing centre = 0,0|  = 0,0
Use drawing origin|  
Current position|  
Material bottom left| 
Excellon options| 
Create tools and processes|    
Drill depth| 
Enabled|
Number format| 
Leading zeros| 
Trailing zeros| 
SerialForm| 
Serial number| 
Please enter your serial number|   
OK|OK
Register now|
Array|
Number of columns| 
Number of rows| 
Part spacing| 
Gap between parts|  
Grid|
Offset even rows|  
Number of toolchanges:|  
Optimisation|
Minimise toolchanges|  
Minimise slew distance|  
Rapid path| 
Inside shape| 
Outside shape| 
Open paths| 
Line end| 
Segment end| 
Background|
Machine working envelope|  
Machine table| 
Work|
Material extents| 
Marker|
Highlight|
Duplicated part| 
Inactive part| 
Centre marker colour|  
Part |
Tutorial1 - Profiling|1-Profiling
Tutorial2 - Pocketing and more advanced features|2 -     
Tutorial3 - Plasma cutting|3 -  
Tutorial4 - Manual nesting|4 -  
Cut sequence:| :
1 cut of |1  
&Mach3|&Mach3
Signal Mach when the post processor is run| Mach    
Creating graphics| 
Open language file|  
You will have to restart SheetCamfor the changes to take effect.|       SheetCam.
Closing down...|...
Set start point size|   
Arrow size| 
{No layers available}|{   } 
 not found|  
{Tool |{ 
 not found}|  }
Enter code| 
 kerf| 
Configure>>|>>
Do you want to save|   
Save job?| job?
starting at |  
Licence file| 
Import licence| 
Removing duplicate vectors|Removing duplicate vectors
Sorting vectors|Sorting vectors
Finding group directions|Finding group directions
Centre finding circles|Centre finding circles
Calculating polygon nesting|Calculating polygon nesting
Error|Error
Plasma, |Plasma, 
Post processor output|Post processor output
Save post-processed output|Save post-processed output
Post processing...|Post processing...
Process completed with |Process completed with 
 errors and | errors and 
 warnings.| warnings.
Version |Version 
Feed rate is zero|Feed rate is zero
Plunge rate is zero|Plunge rate is zero
 diameter| diameter
This tool number is already used|This tool number is already used
Spiral pocket |Spiral pocket 
Zigzag pocket |Zigzag pocket 
Reverse open pathsto minimise slew distance|Reverse open pathsto minimise slew distance
 cuts of | cuts of 
and 1 cut of |and 1 cut of 
This layer does not exist|This layer does not exist
{Layer |{Layer 
Outside offset |Outside offset 
 Deep| Deep
Reading file|Reading file
No paths were generated. The tool may be too bigor there may be a problem with the drawing.|No paths were generated. The tool may be too bigor there may be a problem with the drawing.
Pierce time|Pierce time
Unable to open output file |Unable to open output file 
Auto backup|Auto backup
SheetCam has detected an automatic backup.Do you want to load it?|SheetCam has detected an automatic backup.Do you want to load it?
The tool may not be capableof cutting this deep!|The tool may not be capableof cutting this deep!
The cutter will hit the machine table|The cutter will hit the machine table
Cut passes|Cut passes
These settings will result in more than 20cut passes to reach depth.Are you sure you want to do this?|These settings will result in more than 20cut passes to reach depth.Are you sure you want to do this?
The tool may not be able to cut this deep|The tool may not be able to cut this deep
The tool will hit the table|The tool will hit the table
Open paths were not offset.|Open paths were not offset.
Some features were too small to machine.|Some features were too small to machine.
Tip diameter|Tip diameter
Select first dimension point|Select first dimension point
Select second dimension point|Select second dimension point
Tool set|Tool set
